Paper

2024/4 - 2025/3

195 Thi Thanh Nguyen Ho, Tomoyuki Hirano*, Ryosuke Narui, Hiroshi Tsutsumi, Miho Kishi, Yusuke Yoshikawa, Kiet Le Anh Cao, Takashi Ogi*, Effect of annealing treatment on nanostructure and electrical conductivity of flame-made Ir−IrO2/TiO2 particles, Advanced Powder Technology (IF = 4.2), in press (Ac2024/07/05, PbXXXX/XX/XX).

194 Delyana Ratnasari, Eka Lutfi Septiani, Asep Bayu Dani Nandiyanto, Kiet Le Anh Cao, Nobuhiro Okuda, Hiroyuki Matsumoto, Tomoyuki Hirano, and Takashi Ogi*, Nanostructuring Silica-iron Core-shell Particles in a One-step Aerosol Process, RSC Advances (IF = 3.9), 14, 18171-18180 (2024). (Ac2024/05/30, Pb2024/XX/XX).

193 Eka Lutfi Septiani, Nobuhiro Okuda, Hiroyuki Matsumoto, Kiet Le Anh Cao, Tomoyuki Hirano and Takashi Ogi*, Effects of Coating Characteristics of One-Step Aerosol Synthesized–Silica-Coated FeNi Nanostructured Particles on Powder Core Properties for Electronic Machines Development, ACS Applied Nano Materials (IF = 5.9), 7, 10, 11839–11850 (2024) (Ac2024/04/25, Pb2024/05/03). DOI: https://doi.org/10.1021/acsanm.4c01399

192 Tue Tri Nguyen, Tomoyuki Hirano, Ridha Nurul Chamida, Eka Lutfi Septiani, Nhan Trung Nguyen(+), and Takashi Ogi*, Porous Pectin Particle Formation Utilizing Spray Drying with a Three-Fluid Nozzle, Powder Technology (IF = 5.2), 440, 119782, (2024) (Ac2024/04/17, Pb2024/04/18). DOI: 10.1016/j.powtec.2024.119782

191 Nur Syakirah Nabilah Saipul Bahri, Tue Tri Nguyen, Kohei Matsumoto, Mai Watanabe, Yuko Morita, Eka Lutfi Septiani, Kiet Le Anh Cao, Tomoyuki Hirano, and Takashi Ogi*, Controlling the Magnetic Responsiveness of Cellulose Nanofiber Particles Embedded with Iron Oxide Nanoparticles, ACS Applied Bio Materials (IF = 4.7), 7, 5, 3227–3237 (2024)(Ac2024/04/09, Pb2024/4/16).DOI: https://pubs.acs.org/doi/10.1021/acsabm.4c00213

2023/4 - 2024/3

190 Duhaul Biqal Kautsar, Phong Hoai Le, Ai Ando, Kiet Le Anh Cao, Eka Lutfi Septiani, Tomoyuki Hirano, and Takashi Ogi*, Controllable synthesis of porous and hollow nanostructured catalyst particles and their soot oxidation, Langmuir (IF = 3.9), 40, 15, 8260–8270 (2024) (Ac2024/03/22, Pb2024/4/4). DOI: 10.1021/acs.langmuir.4c00490

189 Diva Addini Maghribi Muyassiroh, Fitri Aulia Permatasari*, Tomoyuki Hirano, Takashi Ogi, and Ferry Iskandar(+)*, Machine Learning-Guided Synthesis of Room-Temperature Phosphorescence Carbon Dots for Enhanced Phosphorescence Lifetime and Information Encryption, ACS Applied Nano Materials (IF = 5.9),  (Ac2024/2/9, Pb2024/2/28)  DOI: https://doi.org/10.1021/acsanm.3c06282

188 Eka Lutfi Septiani, Shunki Yamashita, Delyana Ratnasari, Kiet Le Anh Cao, Tomoyuki Hirano, Nobuhiro Okuda, Hiroyuki Matsumoto, Widiyastuti Widiyastuti, Takashi Ogi*, Enhancing soft magnetic characteristics of dense submicron FeNi particles with low carbon content by swirler connector assisted spray pyrolysis, Chemical Engineering Science (IF = 4.7), 119820 (2024) (Ac2024/01/26, Pb2024/01/30). DOI: 10.1016/j.ces.2024.119820

187 Tomoyuki Hirano*, Takama Tsuboi, Thi Thanh Nguyen Ho, Eishi Tanabe, Aoi Takano, Mikihiro Kataoka, and Takashi Ogi*, Porosity Engineering of Pt Loaded Nb-SnO2 Catalyst Layers in Polymer Electrolyte Fuel Cells, ACS Applied Energy Materials (IF = 6.959), 6(24), 12364–12370 (2023) (Ac2023/11/28, Pb2023/12/8). DOI: 10.1021/acsaem.3c02165

186 Phong Hoai Le, Yasuhiko Kitamoto, Shunki Yamashita, Kiet Le Anh Cao, Tomoyuki Hirano, Tareq Amen, Nao Tsunoji, Takashi Ogi*, Macropore-Size Engineering toward Enhancing the Catalytic Performance of CO Oxidation over Three-Way Catalyst Particles, ACS Applied Materials & Interfaces (IF = 9.5), 15 (46) 54073-54084 (2023) (Ac2023/10/27, Pb2023/11/9) DOI:https://doi.org/10.1021/acsami.3c11489

185 横山 公一, 佐々木 郷紀, 清澤 正志, 佐藤 一教, 平野 知之, 荻 崇*, 多段反応器によるCO2メタネーションプロセス, 化学工学論文集 (IF=0.4), in press. Koichi Yokoyama, Goki Sasaki, Masashi Kiyosawa, Kazunori Sato, Tomoyuki Hirano, and Takashi Ogi*,Multi-Stage Reactor for CO2 Methanation Process, Kagaku Kogaku Ronbunshu (IF=0.4), 50(1), 1-8 (2024). (Ac2022/10/12, Pb2023/?/??) DOI: https://doi.org/10.1252/kakoronbunshu.50.1

184 Nur Syakirah Nabilah Saipul Bahri, Tue Tri Nguyen, Tomoyuki Hirano, Kouhei Matsumoto, Mai Watanabe, Yuko Morita, and Takashi Ogi *, Enhancing water stability of nanostructured cellulose nanofiber particle through the application of oxazoline cross-linker, Advanced Powder Technology (IF = 5.2), 34(12) 104241 (2023) (Ac2023/10/06, Pb2023/10/18). DOI: https://doi.org/10.1016/j.apt.2023.104241

183 Ratnasari Delyana, Eka Lutfi Septiani, Kiet Le Anh Cao, Tomoyuki Hirano, Nobuhiro Okuda, Hiroyuki Matsumoto, Takashi Ogi*, Synthesis of Submicron-sized Spherical Silica-coated Iron Nickel Particles with Adjustable Shell Thickness via A Swirler Connector-assisted Spray Pyrolysis, Langmuir (IF = 3.9), 39(39), 14063–14073 (2023) (Ac2023/09/22, Pb2023/10/03).DOI: 10.1021/acs.langmuir.3c01900

182 Susanne Wintzheimer, Leoni Luthardt, Kiet Le Anh Cao, Inhar Imaz, Daniel Maspoch, Takashi Ogi, Andreas Bück, Damien Debecker, Marco Faustini and Karl Mandel(+)*, Multifunctional, hybrid materials design via spray-drying: much more than just drying, Advanced Materials (IF = 29.4), 35(47), 2306648 (2023). (Ac2023/09/05, Pb2023/10/15) DOI: 10.1002/adma.202306648

181 Phong Hoai Le, Shunki Yamashita, Kiet Le Anh Cao, Tomoyuki Hirano, Nao Tsunoji, Duhaul Biqal Kautsar, Takashi Ogi*, CO Oxidation Enabled by Three-Way Catalysts Comprised of Pd/Rh Nanoparticles Supported on Al2O3 and CeZrO4 Confined in Macroporous Polystyrene Latex Templates, ACS Applied Nano Materials (IF = 5.9), 6 (18) 17324-17335 (2023). (Ac2023/09/02, Pb2023/09/13) DOI: 10.1021/acsanm.3c03954

180 Kiet Le Anh Cao, Yusuke Kito, Phong Hoai Le, Takashi Ogi*, Tomoyuki Hirano*, Synthesis of spherical β-quartz solid-solution particles derived from cordierite using a flame process, ACS Applied Engineering Materials (IF=N/A), 1(7), 1789-1798 (2023). (Ac2023/6/27, Pb2023/7/11) DOI: 10.1021/acsaenm.3c00176

179 Tomoyuki Hirano*, Norito Kadowaki, Akira Ichimiya, Ryosuke Narui, Takashi Ogi*, Tubular flame synthesis of alumina particles: Effect of the addition of energetic materials to precursors, Science and Technology of Energetic Materials (IF = 0.383), 84(3-4), 40-44 (2023) (Ac2023/6/15, Pb2023) DOI:10.34571/stem.84.3-4_40

178 Muhammad Alief Irham, Oktaviardi Bityasmawan Abdillah, Darul Roni Rodiansyah, Fakhrian Hanif Tejo Baskoro, Haerul Fahmi, Takashi Ogi, Ferry Iskandar(+)*, Novel strategy for high-performance supercapacitors through the polyvinylpyrrolidone (PVP)-assisted in-situ growth FeS2, Dalton Transactions (IF=4.569), 52, 8685-8694 (2023). (Ac2023/5/30, Pb2023/6/13) DOI:10.1039/D3DT01031G

177 Tue Tri Nguyen, Nur Syakirah Nabilah Saipul Bahri, Annie Mufyda Rahmatika, Kiet Le Anh Cao, Tomoyuki Hirano, Takashi Ogi*, Rapid Indomethacin Release from Porous Pectin Particles as a Colon Targeted Drug Delivery System, ACS Applied Bio Materials (IF=4.7), 6 (7) 2725-2737 (2023). (Ac2023/6/8, Pb2023/6/21) DOI:10.1021/acsabm.3c00218

176  Phong Hoai Le, Kiet Le Anh Cao, Yasuhiko Kitamoto, Tomoyuki Hirano, Takashi Ogi*, Designing Macroporous Structure of Three-way Catalyst Particles: Influence of Template Concentration on Framework Thickness and Mass Transfer, Langmuir (IF = 4.331), 39 (22) 7783-7792 (2023). (Ac2023/5/16, Pb2023/5/26). DOI:10.1021/acs.langmuir.3c00621

175  Thi Thanh Nguyen Ho, Tomoyuki Hirano*, Ryosuke Narui, Hiroshi Tsutsumi, Miho Kishi, Yusuke Yoshikawa, Kiet Le Anh Cao, Takashi Ogi*, Flame-made Ir-IrO2/TiO2 Particles as Anode Catalyst Support for Improved Durability in Polymer Electrolyte Fuel Cells, ACS Applied Energy Materials (IF=6.959), 6(11), 6064-6071 (2023). (Ac2023/5/2, Pb2023/5/15) DOI:10.1021/acsaem.3c00536

2022/4 - 2023/3

174 T. Hirano, T. Tsuboi, K. L. A. Cao, E. Tanabe, T. Ogi*, High specific surface area niobium-doped tin oxide nanoparticles produced in spray flames as catalyst supports in polymer electrolyte fuel cells, Jounal of Nanoparticle Research (IF=2.253), 25 (2023). (Ac2022/12/7, Pb2022/12/17) DOI: 10.1007/s11051-022-05649-3

173 E. L. Septiani, S. Yamashita, K. L. A. Cao, T. Hirano, N. Okuda, H. Matsumoto, Y. Enokido, T. Ogi*, One-step aerosol synthesis of SiO2 coated FeNi particles by using swirler connector-assisted spray pyrolysis, Industrial and Engineering Chemistry Research (IF=4.326), 61 (49) 17885–17893 (2022). (Ac2022/11/15, Pb2022/11/30) DOI: 10.1021/acs.iecr.2c02837

172 O. B. Abdillah, B. Oktaviardi, O. Floweri, M. A. Irham, A. A. Hasdi, T.Ogi, F. Iskandar*, Structural Modulation of Exfoliated Graphene via a Facile Post-ultrasonication Treatment toward Enhanced Electrochemical Properties of Supercapacitor Electrode, Energy & Fuels (IF=3.605), 36 (23) 14453–14463 (2022). (Ac2022/11/2,Pb2022/11/18) DOI: https://pubs.acs.org/doi/10.1021/acs.energyfuels.2c02809

171 T. T. Nguyen, Y. Toyoda, N. S. N. S. Bahri, A. M. Rahmatika, K. L. A. Cao, T. Hirano, K. Takahashi, Y. Goi, Y. Morita, M. Watanabe, and T. Ogi*, Tuning of Water Resistance and Protein Adsorption Capacity of Porous Cellulose Nanofiber Particles Prepared by Spray Drying with Cross-Linking Reaction, Journal of Colloid and Interface Science (IF=9.965), 630 134-143 (2023). (Ac2022/10/16,Pb2022/X/X) DOI: 10.1007/s12274-022-5131-7

170 Fitri Aulia Permatasari, Reza Umami, Citra Deliana Dewi Sundari, Tirta Rona Mayangsari, Atthar Luqman Ivansyah, Fahdzi Muttaqien, Takashi Ogi, Ferry Iskandar*, New insight into pyrrolic-N site effect towards the first NIR window absorption of pyrrolic-N-rich carbon dots, Nano Research (IF=10.269), (2023). (Ac2022/10/1,Pb2022/10/19) DOI: 10.1016/j.jcis.2022.10.078

169 T. Hirano, S. Kaseda, K. L. A. Cao, F. Iskandar, E. Tanabe,  T. Ogi*, Multiple ZnO Core Nanoparticles Embedded in TiO2 Nanoparticles as Agents for Acid Resistance and UV Protection,  ACS Applied Nano Materials (IF=5.097), 5 (10) 15449–15456 (2022). (Ac2022/9/30, Pb2022/10/11) DOI: 10.1021/acsanm.2c03489

168 横山 公一, 佐々木 郷紀, 清澤 正志, 佐藤 一教, 平野 知之, 荻 崇*, CO2メタネーション用触媒反応器の反応及び温度特性, 化学工学論文集, 49(2), 28-37 (2023). K. Yokoyama, G. Sasaki, M. Kiyosawa, K.Sato,T. Hirano T OGI*,Characteristics of reaction and temperature in catalytic reactors for CO2 methanation, Kagaku Kogaku Ronbunshu (IF=0.338), 49(2), 28-37 (2023). (Ac2022/9/17, Pb2023/3/20)  DOI: https://doi.org/10.1252/kakoronbunshu.49.28

167 A. M. Rahmatika, Y. Toyoda, T. T. Nguyen, K. L. A. Cao, T. Hirano, T. Kitamura, Y. Goi, Y. Morita, T. Ogi*, Effects of Solvent Polarity on Nanostructure Formation of Spray-Dried TEMPO-Oxidized Cellulose Nanofiber Particles, ACS Applied Polymer Materials (IF=4.089), 4, 9, 6700–6709, (2022) (Ac2022/8/4, Pb2022/8/17), DOI: 10.1021/acsapm.2c01063

166 K. L. A. Cao, F. Iskandar, E. Tanabe, T. Ogi*, Recent advances in the fabrication and functionalization of nanostructured carbon spheres for energy storage applications, KONA Powder and Particle Journal (IF=3.919), 40, 197-218, (2023). (Ac2022/7/7, Pb2022/9/23) (Invited Review Article) DOI: https://doi.org/10.14356/kona.2023016

165 E. L. Septiani, J. Kikkawa, K. L. A. Cao, T. Hirano, N Okuda, H. Matsumoto, Y. Enokido, T. Ogi*, DC bias characteristic enhancement of the powder core by using densified submicron sized FeNi particles through spray pyrolysis, Journal of Materials Chemistry C (IF=7.393), 10, 8288–8295 (2022). (Ac2022/5/5, Pb2022/5/6)  DOI: https://doi.org/10.1039/D1TC05917C

164 P. H. Le, Y. Kitamoto, K. L. A. Cao, T. Hirano, E. Tanabe, T. Ogi*, Synthesis of Macroporous Three-way Catalysts via Template-assisted Spray Process for Enhancing Mass Transfer in Gas Adsorption, Advanced Powder Technology (IF=4.833), 33, 6, 103581, (2022) (Ac2022/4/15, Pb2022/5/11) DOI: https://doi.org/10.1016/j.apt.2022.103581

2021/4 - 2022/3

163 T. T. Nguyen, M. Miyauchi, A. M. Rahmatika, K. L. A. Cao, E. Tanabe, T. Ogi*, Enhanced Protein Adsorption Capacity of Macroporous Pectin Particles with High Specific Surface Area and an Interconnected Pore Network, ACS Applied Materials & Interfaces (IF=9.229), 14, 12, 14435-14446, (2022). (Ac2022/3/8, Pb2022/3/18).  DOI: https://doi.org/10.1021/acsami.1c22307

162 Y. Kitamoto, K. L. A. Cao, P. H. Le, O. B. Abdillah, F. Iskandar, T. Ogi*, A sustainable approach for preparing porous carbon spheres derived from Kraft lignin and sodium hydroxide as highly packed thin film electrode materials, Langmuir (IF=3.882), 38, 11, 3540-3552, (2022). (Ac2022/2/24, Pb2022/3/8) DOI: https://doi.org/10.1021/acs.langmuir.1c03489

161 R. Umami, F. A. Permatasari, D. A. M. Muyassiroh, A. S. Santika, C. D. D. Sundari, T. Ogi, F. Iskandar, A rational design of Carbon Dots via the combination of Nitrogen and Oxygen Functional Groups toward the first NIR window Absorption, Journal of Materials Chemistry C (IF=7.393), 10, 1394-1402, (2022). (Ac2021/12/14, Pb2021/12/15) DOI: https://doi.org/10.1039/D1TC04951H

160 F.A. Permatasari,  F. Nakul, T. Mayangsari, A. Aimon, B. Nuryadin, S.Z. Bisri, Z. Satria, T. Ogi, F. Iskandar*, Solid-state Nitrogen-doped Carbon Nanoparticles with Tunable Emission Prepared by Microwave-assisted Method, RSC Advances (IF=3.267), 11, 39917-39923, (2021). (Ac2021/11/23, Pb2021/12/16) DOI: https://doi.org/10.1039/D1RA07290K

159 T. Hirano, T. Tsuboi, E. Tanabe, T. Ogi*, In-situ flame deposition of Pt catalysts on Nb-doped SnO2 nanoparticles, Journal of Alloys and Compounds (IF = 5.316), 898, 162749, (2022). (Ac2021/11/10, Pb2021/11/13) DOI: https://doi.org/10.1016/j.jallcom.2021.162749

158 E. L. Septiani, J. Kikkawa, K. L. A. Cao, T. Hirano, N Okuda, H. Matsumoto, Y. Enokido, and T. Ogi*, Direct synthesis of submicron FeNi particles via spray pyrolysis using various reduction agents, Advanced Powder Technology (IF=4.217), 32(11), 4263-4272, (2021). (Ac2021/9/19, Pb2021/11) DOI: https://doi.org/10.1016/j.apt.2021.09.031

157 A. B. D. Nandiyanto, Y. Kito, T. Hirano, R. Ragadhita, P. H. Le, T. Ogi*, Spherical Submicron YAG:Ce Particles with Controllable Particle Outer Diameters and Crystallite Sizes and Their Photoluminescence Properties, RSC Advances (IF=3.267), 11, 30305 - 30314, (2021). (Ac2021/9/3, Pb2021/9/10) DOI: 10.1039/D1RA04800G

156 T. Hirano, D. Tomonaga, T. Ogi*, D. Shimokuri, Direct spray combustion in a tubular flame burner toward fine particle synthesis, Journal of Thermal Science and Technology (IF=0.781), 16, JTST0035, 2021. (Ac2021/7/20, Pb2021/8/5) DOI: 10.1299/jtst.2021jtst0035

155 T. Hirano, J. Kikkawa, D. Shimokuri, A. B. D. Nandiyanto, T. Ogi*, Sinter-necked mixed metallic tungsten and tungsten oxide nanoparticles produced in fuel-rich methane/air tubular flames, Journal of Chemical Engineering of Japan (IF=0.651), 54 (10), 557-565, 2021. (Ac2021/7/12, Pb2021/10/20) DOI: 10.1252/jcej.21we009

154 S. Nakakura, T. Ogi*, Hexagonal cesium tungsten bronze nanoparticles produced by solvent-free spray pyrolysis and their near infrared absorption properties, Journal of Materials Chemistry C (IF=7.059), 9, 8037-8042, (2021). (Ac2021/6/8, Pb2021/X/X) DOI: 10.1039/D1TC01455B

153 Mahardika F. Rois, W. Widiyastuti, Heru Setyawan, Annie M. Rahmatika, Takashi Ogi, Preparation of activated carbon from alkali lignin using novel one-step process for high electrochemical performance application, Arabian Journal of Chemistry (IF=4.762), 14(6), 103162, (2021). (Ac2021/4/21, Pb2021/6, IC) DOI:https://doi.org/10.1016/j.arabjc.2021.103162

152 K. L. A. Cao, Y. Kitamoto, F. Iskandar, T. Ogi*, Sustainable porous hollow carbon spheres with high specific surface area derived from Kraft lignin, Advanced Powder Technology (IF=4.217), 32(6), 2064-2073, (2021). (Ac2021/4/10, Pb2021/5/8, IC) DOI: https://doi.org/10.1016/j.apt.2021.04.012

2020/4 - 2021/3

151 T. T. Nguyen, A. M. Rahmatika, M. Miyauchi, K. L. A. Cao, T. Ogi*, Synthesis of High Specific Surface Area Macroporous Pectin Particles by a Template-Assisted Spray Drying, Langmuir (IF=3.557), 37(14), 4256-4266, (2021). (Ac2021/3/16, Pb2021/3/29, IC) DOI: https://doi.org/10.1021/acs.langmuir.1c00232

150 O. B. Abdillah, O. Floweri, T. R. Mayangsari,  S. P. Santosa, T. Ogi, F. Iskandar*, Effect of H2SO4/H2O2 Pre-treatment on Electrochemical Properties of Exfoliated Graphite Prepared by Electro-exfoliation Method, RSC Advances (IF=3.070), 11, 10881-10890, (2021). (Ac2021/3/8, Pb2021/3/15) DOI:https://doi.org/10.1039/D0RA10115J

149 Y. Mise, K. Imato, T. Ogi, N. Tsunoji, Y. Ooyama*, Fluorescence sensors for detection of water based on tetraphenylethene–anthracene possessing both solvatofluorochromic properties and aggregation-induced emission (AIE) characteristics, New Journal of Chemistry (IF=3.288), in press. (Ac2021/2/8, Pb202X/XX/XX) DOI:10.1039/D1NJ00186H

148 K. L. A. Cao, A. M. Rahmatika, Y. Kitamoto, M. T. T. Nguyen, T. Ogi*, Controllable synthesis of spherical carbon particles transition from dense to hollow structure derived from Kraft lignin, Journal of Colloid and Interface Science (IF=7.489), 589, 252-263, (2021). (Ac2020/12/21, Pb2020/12/29) DOI:https://doi.org/10.1016/j.jcis.2020.12.077

147 A. M. Rahmatika, Y.  Toyoda, T. T. Nguyen, Y. Goi, T. Kitamura, Y. Morita, K. Kume, T. Ogi*, Cellulose Nanofiber and Magnetic Nanoparticles as Building Blocks Constructing Biomass-based Porous Structured Particles and their Protein Adsorption Performance, ACS Sustainable Chemistry & Engineering (IF = 7.63), 8(50), 18686-18695, (2020). (Ac2020/12/1, Pb2020/12/8) DOI:https://doi.org/10.1021/acssuschemeng.0c07542

146 S. Refly, O. Floweri, T. R. Mayangsari, A. Sumboja, S. P. Santosa, T. Ogi, F. Iskandar*, Regeneration of LiNi1/3Co1/3Mn1/3O2 Cathode Active Materials from End-of-Life Lithium-ion Batteries through Ascorbic Acid Leaching and Oxalic Acid Coprecipitation Processes, ACS Sustainable Chemistry & Engineering (IF = 7.63), 8(43), 16104-16114, (2020). (Ac2020/10/11, Pb2020/x/xx) DOI:https://doi.org/10.1021/acssuschemeng.0c01006

145 H. Gi, K. Shinzato, R. Balgis, T. Ogi, M. Sadakane, Y. Wang, S. Isobe, H. Miyaoka*, T. Ichikawa, Effective factor on catalysis of Niobium oxide for Magnesium, ACS Omega (IF = 2.87), 5(34), 21906-21912, (2020). (Ac2020/8/8, Pb2020/x/xx) DOI: https://doi.org/10.1021/acsomega.0c03101

144 L. Gradon*, R. Balgis**, T. Hirano, A. M. Rahmatika, T. Ogi***, K. Okuyama, Advanced aerosol technologies towards structure and morphologically controlled next-generation catalytic materials, Journal of Aerosol Science (IF = 2.24), 149, 105608, (2020). (Ac2020/6/4, Pb2020/6/20) (Invited Review Article) DOI: 10.1016/j.jaerosci.2020.105608

143 A. M. Rahmatika, Y. Goi, T. Kitamura, Y. Morita, F. Iskandar, T. Ogi*, Silica-Supported Carboxylated Cellulose Nanofibers for Effective Lysozyme Adsorption: Effect of Macropore Size, Advanced Powder Technology (IF = 4.21), 31(7), 2932-2941, (2020). (Ac2020/5/15, Pb2020/6/8) DOI: 10.1016/j.apt.2020.05.021

2019/4 - 2020/3

142 K. L. A. Cao, S. Taniguchi, T. T. Nguyen, A. F. Arif, F. Iskandar, T. Ogi*, Precisely Tailored Synthesis of Hexagonal Hollow Silica Plate Particles and their Polymer Nanocomposite Films with Low Refractive Index, Journal of Colloid and Interface Science (IF=6.361), 571, 378-386, (2020). (Ac2020/3/17, Pb2020/3/25) DOI: 10.1016/j.jcis.2020.03.064

141 Q. Li, C. Kartikowati, T. Iwaki, K. Okuyama, T. Ogi*, Enhanced magnetic performance of aligned wires assembled from nanoparticles: from nanoscale to macroscale, Royal Society Open Science (IF=2.515),7(4), (2020). (Ac2020/3/26, Pb2020/4/22)  https://doi.org/10.1098/rsos.191656

140 T. Ogi*, H. Fukazawa, A. M. Rahmatika, T. Hirano, K. L. A. Cao, F. Iskandar, Improving the crystallinity and purity of monodisperse Ag fine particles by heating colloidal sprays in-flight, Industrial and Engineering Chemistry Research (IF=3.141), 59(13), 5745-5751, (2020). (Ac2020/3/10, Pb2020/3/10) DOI: 10.1021/acs.iecr.9b05482 

139 S. Nakakura, K. Machida, E. Tanabe, K. Adachi, T. Ogi*, Improved Photochromic Stability in Less Deficient Cesium Tungsten Bronze Nanoparticles, Advanced Powder Technology (IF=3.25), 31(2),702-707,(2020). (Ac2019/11/19, Pb2019/12/19) DOI: 10.1016/j.apt.2019.11.025 

138 K. L. A. Cao, A. F. Arif, K. Kamikubo, T. Izawa, H. Iwasaki, T. Ogi*, Controllable synthesis of carbon coated SiOx particles through a simultaneous reaction between the hydrolysis-condensation of tetramethyl orthosilicate and the polymerization of 3-aminophenol, Langmuir (IF=3.683), 35(42), 13681-13692, (2019). (Ac2019/9/26, Pb2019/9/26) DOI: 10.1021/acs.langmuir.9b02599

137 A. B. D. Nandiyanto*, T. Ogi*, W. N. Wang, L. Gradon, K. Okuyama, Template-assisted Spray-drying Method for the Fabrication of Porous Particles with Tunable Structures, Advanced Powder Technology (IF=3.25), 30(12), 2908-2924, (2019). (Ac2019/8/28, Pb2019/9) DOI: 10.1016/j.apt.2019.08.037

136 R. Maharsi, A. F. Arif, T. Ogi, H. Widiyandari, F. Iskandar, Electrochemical properties of TiOx/rGO composite as an electrode for supercapacitor, RSC Advances (IF=3.049), 9, 27896-27903, (2019). (Ac2019/8/26, Pb2019/9/4) DOI:10.1039/C9RA04346B

135 A. M. Rahmatika, Y. Goi, T. Kitamura, W. Widiyastuti, T. Ogi*, TEMPO-Oxidized Cellulose Nanofiber (TOCN) decorated macroporous silica particles: synthesis, characterization, and their application in protein adsorption, Materials Science and Engineering: C (IF=4.959), 105, 110033, (2019). (Ac2019/7/30, Pb2019/7/30) https://doi.org/10.1016/j.msec.2019.110033

134 S. Nakakura, A. F. Arif, K. Machida, K. Adachi, T. Ogi*, Cationic defect engineering for controlling the infrared absorption of hexagonal cesium tungsten bronze nanoparticles, Inorganic Chemistry (IF=4.700), 58(14), 9101-9107, (2019). (Ac2019/6/14, Pb2019/6/27) https://doi.org/10.1021/acs.inorgchem.9b00642

133 T. Hirano, J. Kikkawa, F. G. Rinaldi, K. Kitawaki, D. Shimokuri, E. Tanabe, T. Ogi*, Tubular flame combustion for nanoparticle production, Industrial and Engineering Chemistry Research (IF=3.141), 58(17), 7193-7199, (2019). (Ac2019/4/15, Pb2019/4/15) https://doi.org/10.1021/acs.iecr.9b00620

2018/4 - 2019/3

132 C. Yang, K. K. Chan, G. Xu*, M. Yin, G. Lin, X. Wang, W.J. Lin, M. D. Birowosuto, S. Zeng, T. Ogi, K. Okuyama, F. A. Permatasari, F. Iskandar, C. K. Chen*, K.T. Yong*, Biodegradable Polymer-Coated Multifunctional Graphene Quantum Dots for Light-Triggered Synergetic Therapy of Pancreatic Cancer, ACS Applied Materials & Interfaces (IF= 8.097), 11(3), 2768-2781, (2019). (Ac2018/12/27, Pb2012/27) https://doi.org/10.1021/acsami.8b16168

131 T. Izawa, A. F. Arif, S. Taniguchi, K. Kamikubo, H. Iwasaki, T. Ogi*, Improving the performance of Li-ion battery carbon anodes by in-situ immobilization of SiOx nanoparticles, Materials Research Bulletin (IF= 2.873), 112, 16-21, (2019). (Ac2018/11/29, Pb2019/4) https://doi.org/10.1016/j.materresbull.2018.11.044

130 S. Nakakura, A. F. Arif, F. G. Rinaldi, T. Hirano, E. Tanabe, R. Balgis, T. Ogi*, Direct Synthesis of Highly Crystalline Single-phase Hexagonal Tungsten Oxide Nanorods by Spray Pyrolysis, Advanced Powder Technology (IF=2.943), 30(1), 6-12, (2019). (Ac2018/9/26, Pb2018/9/26) https://doi.org/10.1016/j.apt.2018.09.040

129 A. Purwanto, C. Yudha, H. Widiyandari, U. Ubaidillah, T. Ogi, H. Haerudin, NCA Cathode Material: Synthesis Methods and Performance Enhancement Efforts, Materials Research Express (IF=1.151), 5(12), 122001(22 pages), (2018). Review paper (Ac2018/9/7,Pb2018/9/14) https://doi.org/10.1088/2053-1591/aae167

128 F. G. Rinaldi, O. Arutanti, A. F. Arif, T. Hirano, T. Ogi*, K. Okuyama, Correlations between reduction degree and catalytic properties of WOx nanoparticles, ACS Omega, 3(8), 8963-8970, (2018). (Ac2018/8/6,Pb2018/8/13) https://doi.org/10.1021/acsomega.8b01110

127 A. M. Rahmatika, Y. Weilin, A. F. Arif, R. Balgis, K. Miyajima, G. M. Anilkumar, K. Okuyama ,T. Ogi*, Energy-efficient templating method for the industrial production of porous carbon particles by a spray pyrolysis process using poly(methyl methacrylate), Industrial & Engineering Chemistry Research (IF=3.141), 57(33), 11335-11341, (2018). (Ac2018/7/27, Pb2018/7/27) https://doi.org/10.1021/acs.iecr.8b02564

126 T. Ogi*, H. Horiuchi, T. Makino, A. F. Arif, K. Okuyama, Simple, Rapid, and Environmentally Friendly Method for Selectively Recovering Tantalum by Guanidine-Assisted Precipitation, ACS Sustainable Chemistry & Engineering (IF=6.140), 6(8), 9585-9590, (2018). (Ac2018/7/19,Pb2018/7/19) https://doi.org/10.1021/acssuschemeng.8b02440

125 L. Qomariyah, A. F. Arif, W Widiyastuti, S. Winardi, S. Taniguchi, T. Ogi*, Hexagonal hollow silica plate particles with high transmittance under ultraviolet-visible light, RSC Advances (IF=2.936), 8, 26277–26282, (2018). (Ac2018/7/12, Pb2018/7/23) 10.1039/C8RA04787A

124 T. Hirano, S. Nakakura, F. G. Rinaldi, E. Tanabe, W. N. Wang, T. Ogi*, Synthesis of Highly Crystalline Hexagonal Cesium Tungsten Bronze Nanoparticles by Flame-assisted Spray Pyrolysis, Advanced Powder Technology (IF=2.943), 29(10), 2512–2520, (2018). (Ac2018/7/3, Pb2018/10) https://doi.org/10.1016/j.apt.2018.07.001

123 R. Balgis, H. Murata, T. Ogi*, M. Kobayashi, L. Bao, Enhanced Aerosol Particle Filtration Efficiency of Nonwoven Porous Cellulose Triacetate Nanofiber Mats, ACS Omega, 3(7), 8271–8277, (2018). (Ac2018/6/8, Pb2018/7/25) https://doi.org/10.1021/acsomega.8b00695

122 F. Permatasari, H. Fukazawa, T. Ogi*, F. Iskandar, K. Okuyama, Design of Pyrrolic-N-Rich Carbon Dots with Absorption in the First Near-Infrared Window for Photothermal Therapy, ACS Applied Nano Materials, 1(5), 2368-2375, (2018). (Ac2018/4/,Pb2018/4/19) https://doi.org/10.1021/acsanm.8b00497

121 A. F. Arif, S. Taniguchi, T. Izawa, K. Kamikubo, H. Iwasaki,  T. Ogi*, Microwave-assisted synthesis of C/SiO2 composite with controllable silica nanoparticle size, ACS Omega, 3(4), 4063-4069, (2018). (Ac2018/4/7,Pb2018/4/11), https://doi.org/10.1021/acsomega.8b00340

2017/4 - 2018/3

120 T. Makino, S. Nagai, F. Iskandar, K. Okuyama, T. Ogi*, Recovery and Recycling of Tungsten by Alkaline Leaching of Scrap and Charged Amino Group Assisted Precipitation, ACS Sustainable Chemistry & Engineering (IF=5.951), 6(3), 4246-4252, (2018). (Ac2018/1/19,Pb2018/1/19), https://doi.org/10.1021/acssuschemeng.7b04689

119 A. F. Arif, Y. Kobayashi, E. M. Schneider, S. C Hess, R. Balgis, T. Izawa, H. Iwasaki, S. Taniguchi,T. Ogi*, K. Okuyama, W. J. Stark, Selective Low-Energy Carbon Dioxide Adsorption Using Monodisperse Nitrogen-Rich Hollow Carbon Submicron Spheres, Langmuir (IF=3.833), 34(1), 30-35, (2018). (Ac2017/12/,Pb2017/12/7) https://doi.org/10.1021/acs.langmuir.7b01353

118 F. G. Rinaldi, A. F. Arif, T. Ogi*, K. Okuyama, E. Tanabe, Strong Metal-Support Interactions (SMSIs) between Pt and Ti3+ on Pt/TiOx Nanoparticles for Enhanced Degradation of Organic Pollutant, Advanced Powder Technology (IF=2.659), 28 (11), 2987-2995, (2017). (Ac2017/9/11,Pb2017/9/19) https://doi.org/10.1016/j.apt.2017.09.007

117 C. W. Kartikowati, Q. Li, S. Horie, T. Ogi*, T. Iwaki, K. Okuyama, Aligned Fe3O4 magnetic nanoparticle films by magneto-electrospray method, RSC Advances (IF=3.11), 7, 40124-40130, (2017). (Ac2017/8/10,Pb2017/8/16) 10.1039/C7RA07944C

116 Q. Li, S. Horie, C. Kartikowati, T. Ogi*, T. Iwaki, K. Okuyama, Correlation between particle size/domain structure and magnetic properties of highly crystalline Fe3O4 nanoparticles,Scientific Reports (IF= 4.26),7, 9894-1-7 (2017). (Ac2017/7/31,Pb2017/8/30) DOI: 10.1038/s41598-017-09897-5

115 R. Balgis, W. Widiyastuti, T. Ogi*, K. Okuyama, Enhanced electrocatalytic activity of Pt/3D hierarchical bimodal macroporous carbon nanospheres, ACS Applied Materials & Interfaces (IF= 7.504) ,9 (28), 23792-23799 (2017). (Ac2017/6/27,Pb2017/6/27) https://doi.org/10.1021/acsami.7b05873

114 R. Balgis, H. Murata, Y. Goi, T. Ogi*, K. Okuyama, L. Bao, Synthesis of Dual-Size Cellulose-Polyvinylpyrrolidone Nanofiber Composites via One-Step Electrospinning Method for High-Performance Air Filter, Langmuir (IF= 3.993), 33(24), 6127–6134 (2017). (Ac2017/5/30,Pb2017/5/30) https://doi.org/10.1021/acs.langmuir.7b01193

113 E. M. Schneider, S. Taniguchi, Y. Kobayashi, S. C. Hess, R. Balgis, T. Ogi*, K. Okuyama, W. J. Stark, Efficient recycling of polylactic acid nanoparticle templates for the synthesis of hollow silica spheres, ACS Sustainable Chemistry & Engineering (IF= 5.267), 5(6), 4941-4947 (2017). (Ac2017/5/16,Pb2017/5/16) https://doi.org/10.1021/acssuschemeng.7b00338

112 U. Saleem, F. A. Permatasari, F. Iskandar, T. Ogi, K. Okuyama, Y. Dharma, A. Rusydi, K. P. Loh, M. D. Birowosuto, P. Coquet, H. Wang, Surface Plasmon Enhanced Nitrogen-doped Graphene Quantum Dots Emission by Single Bismuth Telluride Nanoplates, Advanced Optical Materials (IF= 5.359), 1700176, 1–6 (2017). (Ac2017/5/4,Pb2017/6/26) https://doi.org/10.1002/adom.201700176

111 A. F. Arif, R. Balgis, T. Ogi*, F. Iskandar, A. Kinoshita, K. Nakamura, K. Okuyama, Highly conductive nano-sized Magnèli phases titanium oxide (TiOx), Scientific Reports (IF= 5.228), 7, 3646 (2017). (Ac2017/4/28,Pb2017/6/16) DOI: 10.1038/s41598-017-03509-y

2016/4 - 2017/3

110 T. Ogi*, T. Makino, S. Nagai, W. J. Stark, F. Iskandar, K. Okuyama, Facile and efficient removal of tungsten anions using lysine-promoted precipitation for recycling high-purity tungsten, ACS Sustainable Chemistry & Engineering (IF= 5.267), 5(4), 3141–3147 (2017). (Ac2017/2/18,Pb2017/2/18) https://doi.org/10.1021/acssuschemeng.6b02934

109 R. Balgis, L. Gradon, L. Ernawati, T. Ogi*, K. Okuyama, Controlled Surface Topography of Nanostructured Particles Prepared by Spray-Drying Process, AIChE Journal (IF= 2.98), 63(5), 1503–1511 (2017). (Ac2017/2/14,Pb2017/3/2) https://doi.org/10.1002/aic.15682

108 S. C. Hess, F. A. Permatasari, H. Fukazawa, E. M. Schneider, R. Balgis, T. Ogi*, K. Okuyama, W. J. Stark*, Direct Synthesis of Carbon Quantum Dots in Aqueous Polymer Solution: One-Pot Reaction and Preparation of Transparent UV-Blocking Films, Journal of Materials Chemistry A (IF= 8.262), 5, 5187–5194 (2017). (Ac2017/2/13,Pb2017/5/) DOI: 10.1039/C7TA00397H, From themed collection 2017 Journal of Materials Chemistry A HOT Papers

107 Q. Li, C. W. Kartikowati, T. Ogi* , T. Iwaki, K. Okuyama, Facile fabrication of carbon nanotube forest-like films via coaxial electrospray, Carbon (IF= 6.198), 115, 116–119 (2017). (Ac2016/12/31,Pb2017/5/) http://dx.doi.org/10.1016/j.carbon.2016.12.095

106 L. Ernawati, R. Balgis, T. Ogi* , K. Okuyama, Tunable Synthesis of Mesoporous Silica Particle with a Unique Radially Oriented Pore Structures from Tetramethyl Orthosilicate via Oil-Water Emulsion Process, Langmuir (IF= 3.993), 33(3), 783–790 (2017). (Ac2016/12/27,Pb2016/12/27) https://doi.org/10.1021/acs.langmuir.6b04023

105 L. Ernawati, R. Balgis, T. Ogi* , K. Okuyama, T. Takada, Role of acetone in the formation of highly dispersed cationic polystyrene nanoparticles, Chemical and Process Engineering (IF= 0.519), 38(1), 5–18 (2017). (Ac2016/9/28,Pb201X/XX/XX) https://doi.org/10.1515/cpe-2017-0002

104 T. Ogi, Q. Li, S. Horie, A. Tameka, T. Iwaki, K. Okuyama, High-purity core-shell α″-Fe16N2/Al2O3 nanoparticles synthesized from α-hematite for rare-earth-free magnet applications, Advanced Powder Technology (IF=2.638), 27(6), 2520–2525 (2016). (Ac2016/9/13,Pb2016/11) https://doi.org/10.1016/j.apt.2016.09.017

103 A. F. Arif, Y. Chikuchi, R. Balgis, T. Ogi*, K. Okuyama, Synthesis of nitrogen-functionalized macroporous carbon particles via spray pyrolysis of melamine-resin, RSC Advances (IF=3.289), 6, 83421–83428 (2016). (Ac2016/8/28,Pb2016/8/29) DOI: 10.1039/C6RA15217A

102 T. Ogi*, T. Makino, E. Tanabe, F. Iskandar, K. Okuyama, Heat-treated Escherichia coli as a high-capacity biosorbent for tungsten anions, Bioresource Technology (IF=4.917), 218, 140–145 (2016). (Ac2016/6/19,Pb2016/10) https://doi.org/10.1016/j.biortech.2016.06.076

101 O. Arutanti, A. F. Arif, R. Balgis, T. Ogi*, F. Iskandar, K. Okuyama, Tailored synthesis of macroporous Pt/WO3 photocatalyst with nanoaggregates via flame assisted spray pyrolysis, AIChE Journal (IF=2.748), 62(11), 3864–3873 (2016). (Ac2016/5/28,Pb2016/11) DOI: 10.1002/aic.15349

100 A. F. Arif, Y. Kobayashi, R. Balgis, T. Ogi*, H. Iwasaki, K. Okuyama, Rapid microwave-assisted synthesis of nitrogen-functionalized hollow carbon spheres with high monodispersity, Carbon (IF=6.196), 107, 11–19 (2016). doi:10.1016/j.carbon.2016.05.048. (Ac2016/5/22,Pb2016/XX)

99 T. Ogi*, K. Aishima, F. A. Permatasari, F. Iskandar, E. Tanabe, K. Okuyama, Kinetics of nitrogen-doped carbon dot formation via hydrothermal synthesis, New Journal of Chemistry (IF=3.086), 40, 5555–5561 (2016). (Ac2016/4/22,Pb2016/4/26) DOI: 10.1039/C6NJ00009F

2015/4 - 2016/3

98 T. Ogi*, T. Makino, K. Okuyama, W. J. Stark, F. Iskandar, Selective Biosorption and Recovery of Tungsten from an Urban Mine and Feasibility Evaluation, Industrial & Engineering Chemistry Research (IF=2.587), 55(10), 2903 –2910 (2016). (Ac2016/2/23,Pb2016/2/23) https://doi.org/10.1021/acs.iecr.5b04843 

97 F. A. Permatasari, A. H. Aimon, F. Iskandar, T. Ogi, K. Okuyama, Role of C–N Configurations in the Photoluminescence of Graphene Quantum Dots Synthesized by a Hydrothermal Route, Scientific Reports (IF=5.578), 6, 21042 (2016). doi:10.1038/srep21042 (Ac2016/1/15,Pb2016/2/15)

96 C. W. Kartikowati, A. Suhendi, R. Zulhijah, T. Ogi*, T. Iwaki, K. Okuyama, Effect of Magnetic Field Strength on the Alignment of α″-Fe16N2 Nanoparticle Films, Nanoscale (IF=7.394),8, 2648-2655, (2016). DOI: 10.1039/C5NR07859H (Ac2016/1/5,Pb2016/1/5)

95 L. Bao, K. Seki, H. Niinuma, Y. Otani, R. Balgis, T. Ogi, L. Gradon, K. Okuyama, Verification of Slip Flow in Nanofiber Filter Media through Pressure Drop Measurement at Low-Pressure Conditions, Separation and Purification Technology (IF=3.091), 159, 100–107 (2016). (Ac2015/12/27,Pb2015/??) doi:10.1016/j.seppur.2015.12.045

94 L. Ernawati, T. Ogi*, R. Balgis, K. Okuyama, M. Stucki, S. C. Hess, W.J. Stark, Hollow Silica as an Optically Transparent and Thermally Insulating Polymer Additive, Langmuir (IF=4.457), 32(1), 338-345 (2016). (Ac2015/12/10,Pb2015/12/10) https://doi.org/10.1021/acs.langmuir.5b04063

93 T. Ogi*, R. Zulhijah, T. Iwaki, K. Okuyama, Recent progress in nanoparticle dispersion using bead mill, KONA Powder and Particle Journal (IF=1.780), 34, 3-23 (2017). (Ac2015/11/24, Pb2017/1) (Invited Review Article) https://doi.org/10.14356/kona.2017004

92 C. W. Kartikowati, A. Suhendi, R. Zulhijah, T. Ogi*, T. Iwaki, K. Okuyama, Preparation and evaluation of magnetic nanocomposite fibers containing α″-Fe16N2 and α-Fe nanoparticles in polyvinylpyrrolidone via magneto-electrospinning, Nanotechnology (IF=2.670), 27(2), 025601, (2016) (Ac2015/10/16,Pb2015/11/30) DOI: 10.1088/0957-4484/27/2/025601

91 R. Balgis, A. F. Arif, T. Mori, T. Ogi*, K. Okuyama, G. M. Anilkumar, Morphology-Dependent Electrocatalytic Activity of Nanostructured Pt/C Particles from Hybrid Aerosol–Colloid Process, AIChE Journal (IF=2.748), 62(2), 440-450 (2016). (Ac2015/9/18,Pb2016/2) https://doi.org/10.1002/aic.15059 One of figures has been selected as the cover figure of this journal.

90 A. Suhendi, R. Zulhijah, C. W. Kartikowati, T. Ogi*, T. Iwaki, K. Okuyama, Preparation and Characterization of Magnetic Films of Well-dispersed Single Domain of Core-Shell α″-Fe16N2/Al2O3 Nanoparticles, Advanced Powder Technology (IF=2.638), 26, 1618-1623 (2015). (Ac2015/9/12,Pb2015/9/28 online) https://doi.org/10.1016/j.apt.2015.09.005

89 R. Balgis, C. W. Kartikowati, T. Ogi*, L. Gradon, L. Bao, K. Seki, K. Okuyama, Synthesis and evaluation of straight and bead-free nanofibers for improved aerosol filtration, Chemical Engineering Science (IF=2.337), 137, 947-954 (2015). (Ac2015/8/1,Pb2015/12/1), https://doi.org/10.1016/j.ces.2015.07.038

88 S. Okazaki, K. Hamai, A. F. Arif, T. Ogi*, K. Okuyama, Facile synthesis of spherical carbon composite particles via a dry granulation process, Carbon (IF=6.196), 94, 439-447 (2015). (Ac2015/7/10,Pb2015/11)  https://doi.org/10.1016/j.carbon.2015.07.014

87 R. Zulhijah, A. Suhendi, K. Yoshimi, C. Kartikowati, T. Ogi*, T. Iwaki, K. Okuyama, Low-Energy Bead-Mill Dispersion of Agglomerated Core–Shell α-Fe/Al2O3 and α″-Fe16N2/Al2O3 Ferromagnetic Nanoparticles in Toluene, Langmuir (IF=4.384), 31(22), 6011-6019 (2015). (Ac2015/5/19,Pb2015/5/XX) https://doi.org/10.1021/acs.langmuir.5b00901

86 H. Iwasaki, T. Ogi*, F. Iskandar, K. Aishima, K. Okuyama, Microwave synthesis of homogeneous and highly luminescent BCNO nanoparticles for the light emitting polymer materials, Journal of Luminescence (IF=2.367), 166, 148-155 (2015). (Ac2015/5/12,Pb2015/10), https://doi.org/10.1016/j.jlumin.2015.05.012

2014/4 - 2015/3

85  A. F. Arif, R. Balgis, T. Ogi, T. Mori and K. Okuyama, Experimental and Theoretical Approach to Evaluation of Nanostructured Carbon Particles Derived from Phenolic Resin via Spray Pyrolysis, Chemical Engineering Journal (IF=4.058), 271, 79-86 (2015). (Ac2015/2/23,Pb2015/1/1) https://doi.org/10.1016/j.cej.2015.02.078

84  O. Arutanti, A. B. D. Nandiyanto, T. Ogi*, T.O. Kim, K. Okuyama, Influences of Porous Structurization and Pt Addition on the Improvement of Photocatalytic Performance of WO3 Particles, ACS Applied Materials & Interfaces (IF=5.900), 7(5), 3009-3017 (2015).(Ac2015/1/22, Pb2015/1/21) https://doi.org/10.1021/am507935j

83  K.J. Yim,D.K. Song, C.S. Kim, N.G. Kim, T. Iwaki, T. Ogi, K. Okuyama, S.E. Lee, T.O. Kim, Selective, high efficiency reduction of CO2 in a non-diaphragm-based electrochemical system at low applied voltage, RSC Advances (IF=3.708), 5, 9278-9282 (2015).(Ac2014/12/22,Pb201X/X). 10.1039/C4RA14427A

82  R. Zulhijah, A. B. D. Nandiyanto, T. Ogi*, T. Iwaki, K. Nakamura, K. Okuyama, Effect of oxidation on a"-Fe16N2 phase formation from plasma-synthesized spherical core-shell a-Fe/Al2O3 nanoparticles, Journal of Magnetism and Magnetic Materials (IF=2.002), 381, 89-98 (2015). (Ac2014/12/12,Pb2015/5). https://doi.org/10.1016/j.jmmm.2014.12.015

81  R. Balgis, T. Ogi*, A.F. Arif,G. Anilkumar, T. Mori, K. Okuyama, Morphology control of hierarchical porous carbon particles from phenolic resin and polystyrene latex template via aerosol process, Carbon (IF=6.160), 84, 281-289 (2015).(Ac2014/12/4,Pb2015/4) https://doi.org/10.1016/j.carbon.2014.12.010

80  T. Ogi*, H. Iwasaki, K. Aishima, F. Iskandar, W-N Wang, K Takimiya, K. Okuyama, Transient Nature of Graphene Quantum Dot Formation via a Hydrothermal Reaction, RSC Advances (IF=3.708), 4, 55709-55715 (2014).(Ac2014/10/21,Pb201X/X). DOI: 10.1039/C4RA09159K

79  R. Balgis, T. Ogi*, W.N. Wang,G. Anilkumar, S. Sago, K. Okuyama, Aerosol Synthesis of Self-Organized Nanostructured Hollow and Porous Carbon Particles using a Dual Polymer System, Langmuir (IF=4.384) 30, 11257-11262 (2014). (Ac2014/9/11,Pb201X/X). https://doi.org/10.1021/la502545d

78  A. B. D. Nandiyanto, A. Suhendi, T. Ogi*, R.Umemoto, K. Okuyama, Size- and Charge-controllable Polystyrene Spheres for Templates in the Preparation of Porous Silica Particles with Tunable Internal Hole Configurations, Chemical Engineering Journal (IF=4.058), 256, 421-430 (2014). (Ac2014/7/2,Pb2014/11/15)  https://doi.org/10.1016/j.cej.2014.07.005

77  T. Tahara, Y. Imajou, A. B. D. Nandiyanto, T. Ogi*, T. Iwaki, K. Okuyama, Low-energy bead-milling dispersions of rod-type titania nanoparticles and their optical properties, Advanced Powder Technology (IF=1.65) ,25(5), 1492-1499 (2014). (Ac2014/4/14,Pb2014/9). https://doi.org/10.1016/j.apt.2014.04.004

76  R Zulhijah, A. B. D. Nandiyanto, T. Ogi*, T. Iwaki, K. Nakamura, K. Okuyama, Gas Phase Preparation of Spherical Core-Shell a”-Fe16N2/SiO2 Magnetic Nanoparticles, Nanoscale (IF=6.23), 6, 6487-6491 (2014). (Ac2014/4/12,Pb2014/5). DOI: 10.1039/C3NR06867F

2013/4 - 2014/3

75  T. Ogi*, H. Iwasaki, A. B. D. Nandiyanto, F. Iskandar, W.-N. Wang, K. Okuyama, Direct White Light Emission from a Rare-Earth-Free Aluminium-Boron-Carbon-Oxynitride Phosphor, Journal of Materials Chemistry C (IF=6.101), 2(21), 4297-4303, (2014). (Ac2014/3/13, Pb2014/5/17). 10.1039/C3TC32314E

74  岡崎 精二, 濱井健太, 坂本 明男, 荻 崇*, 奥山 喜久夫, 乾式造粒法による等方性結晶を持つ球形黒鉛材料の合成, 化学工学論文集 (IF=0.312), 40(3), 234–239 (2014). (Ac2014/2/26, Pb2014/5)., S. Okazaki, K. Hamai, A. Sakamoto, T. Ogi*, K. Okuyama, Synthesis of Spherical Graphitized Carbon Powder with Homolytic Crystals by a Dry Granulation Process, Kagaku Kogaku Ronbunshu (IF=0.312), 40(3), 234–239 (2014). (Ac2014/2/26, Pb2014/5). https://doi.org/10.1252/kakoronbunshu.40.234

73  A.B.D.Nandiyanto, T. Ogi*, K. Okuyama, Control of the Shell Structural Properties and Cavity Diameter of Hollow Magnesium Fluoride Particles, ACS Applied Materials & Interfaces (IF=5.008), 6, 4418-4427, (2014). (Ac2014/2/21,Pb2014/3) https://doi.org/10.1021/am500139m　

72  S. Hatakeyama, K. Ikeda, S. Hanaoka, I. Watanabe, T. Arakaki, H. Bandow, Y. Sadanaga, S. Kato, Y. Kajii, D. Zhang, K. Okuyama, T. Ogi, T. Fujimoto, T. Seto, A. Shimizu, N. Sugimoto, A. Takami, Aerial observations of air masses transported from East Asia to the Western Pacific: Vertical structure of polluted air masses, Atmospheric Environment (IF=3.110), 97, 456-461, (2014). (Ac2014/2/19, Pb2014/1) 10.1016/j.atmosenv.2014.02.040

71  H. Fujiwara, Y. Sadanag, J. Urata, Y. Masui, H. Bandow, K. Ikeda, S. Hanaoka, I. Watanabe, T. Arakaki, S. Kato, Y. Kajii, D. Zhang, K. Hara, T. Fujimoto, T. Seto, K. Okuyama, T. Ogi, A. Takami, A. Shimizu, S. Hatakeyama, Aerial observation of nitrogen compounds over the East China Sea in 2009 and 2010, Atmospheric Environment (IF=3.110), 97, 462-470, (2014). (Ac2014/1/28,Pb2014/11) https://doi.org/10.1016/j.atmosenv.2014.01.064

70  B. W. Nuryadin, T. P. Pratiwi, F. Iskandar, M. Abdullah, Khairurrijal, T. Ogi, K. Okuyama, Photoluminescence Optimization of BCNO Phosphors Synthesized Using Citric Acid as a Carbon Source, Advanced Powder Technology (IF=1.650), 25(3), 891-895, (2014). (Ac2014/1/12,Pb2015/5) https://doi.org/10.1016/j.apt.2014.01.003

69  O. Arutanti, A. B. D. Nandiyanto, T. Ogi*, F. Iskandar, T. O. Kim, K. Okuyama, Synthesis of Composite WO3/TiO2 Nanoparticles by Flame-assisted Spray Pyrolysis and Their Photocatalytic Activity, Journal of Alloys and Compounds (IF=2.390), 59(5), 121–126 (2014). (Ac2013/12/23, Pb2014/4) https://doi.org/10.1016/j.jallcom.2013.12.218

68  I. D. Faryuni, B. W. Nuryadin, F. Iskandar, M. Abdullah, Khairurrijal, T. Ogi, K. Okuyama, Synthesis and photoluminescence of BCNO/SiO2 nanocomposite phosphor materials, Journal of Luminescence (IF=2.144), 148, 165–168 (2014). (Ac2013/12/13, Pb2014/4) https://doi.org/10.1016/j.jlumin.2013.12.033

67  T. Ogi*, A.B.D. Nandiyanto, K. Okuyama, Nanostructuring strategies in functional fine-particle synthesis towards resource and energy saving applications, Advanced Powder Technology (IF=1.650),25(1), 3-17, (2014). (Ac2013/11/12,Pb2014/1)  (Invited Review Article), https://doi.org/10.1016/j.apt.2013.11.005

66  R. Balgis,S. Sago, G.M. Anilkumar, T. Ogi*, K. Okuyama, Self-Organized Macroporous Carbon Structure Derived from Phenolic Resin via Spray Pyrolysis for High-Performance Electrocatalyst, ACS Applied Materials & Interfaces (IF=5.008), 5 (22), 11944–11950 (2013). (Ac2013/10/31, Pb2013/10) https://doi.org/10.1021/am403695u

65  岡崎 精二, 山口 浩平, 坂本 明男, 荻 崇*, 奥山 喜久夫, 炭素材料粉末の黒鉛化処理における加熱雰囲気の影響, 化学工学論文集 (IF=0.312), 40 (1), 1–6 (2014). (Ac2013/10/07,Pb2014/1), S. Okazaki, K. Yamaguchi, A. Sakamoto, T. Ogi*, K. Okuyama, Effect of gas atmosphere on graphitization of carbon powder, Kagaku Kogaku Ronbunshu (IF=0.312), 40(1), 1–6 (2014). (Ac2013/10/07, Pb2014/1). http://dx.doi.org/10.1252/kakoronbunshu.40.12

64  A. Suhendi, A. B. D. Nandiyanto, M.M. Munir, T. Ogi*, L. Gradon, K. Okuyama, Self-assembly of colloidal nanoparticles inside charged droplets during spray-drying in the fabrication of nanostructured particles, Langmuir (IF=4.187), 29 (43), 13152–13161 (2013). (Ac2013/09/26,Pb2013/9) https://doi.org/10.1021/la403127e

63  R. Zulhijah, K. Yoshimi, A.B.D. Nandiyanto, T. Ogi*, T. Iwaki, K. Nakamura, K. Okuyama, a"-Fe16N2 phase formation of plasma-synthesized core-shell type a-Fe nanoparticles under various conditions, Advanced Powder Technology (IF=1.650), 25(2). 582-590, (2014). (Ac2013/09/14,Pb2014/3) DOI: 10.1016/j.apt.2013.09.006

62  T. Ogi*, Y. Sakamoto, A.B.D. Nandiyanto, K. Okuyama, Biosorption of tungsten by Escherichia coli for environmentally friendly recycling system, Industrial and Engineering Chemistry Research (IF=2.206), 52 (40), 14441–14448 (2013). (Ac2013/09/07,Pb2013/9) https://doi.org/10.1021/ie401193y

61  O. Arutanti, T. Ogi*, A.B.D. Nandiyanto, F. Iskandar, K. Okuyama, Controllable crystallite and particle sizes of WO3 particles prepared by a spray-pyrolysis method and their photocatalytic activity, AlChE Journal (IF=2.261),60(1), 41-49 (2014). (Ac2013/08/30, Pb2014/1) https://doi.org/10.1002/aic.14233

60  A.B.D.Nandiyanto, O. Arutanti, A. Suhendi, T. Ogi*, F. Iskandar, T.O. Kim, K. Okuyama, Synthesis of Spherical Macroporous WO3 Particles and Their High Photocatalytic Performance, Chemical Engineering Science (IF=2.386),101(20), 523-532 (2013). (Ac2013/06/27, Pb2013/9) https://doi.org/10.1016/j.ces.2013.06.049

59  田原 隆志, 院去 貢, 今城 祐二, 荻 崇*, 奥山 喜久夫, 2軸式ビーズミルによるチタニアナノ粒子の分散，凝集および再分散過程における粒子特性の変化, 化学工学論文集 (IF=0.312), 39 (5), 426–432 (2013). (Ac2013/06/14,Pb2013/10), T. Tahara, M. Inkyo, Y. Imajou, T. Ogi* , K. Okuyama, Change in Characteristics of Titania Nanoparticles during the Process of Dispersion, Agglomeration and Re-dispersion with a Dual-axis Beads-Mill, Kagaku Kogaku Ronbunshu (IF=0.312),39 (5), 426–432 (2013).(Ac2013/06/14, Pb2013/10) http://dx.doi.org/10.1252/kakoronbunshu.39.426

58  A. Suhendi, A. B. D. Nandiyanto, M. M. Munir, T. Ogi*, K. Okuyama, Preparation of agglomeration-free spherical hollow silica particles using an electrospray method with colloidal templating, Materials Letters (IF=2.307),106(1), 432-435 (2013).(Ac2013/05/16, Pb2013/9) https://doi.org/10.1016/j.matlet.2013.05.056

57  A.B.D. Nandiyanto, A. Suhendi, O. Arutanti, T. Ogi*, K. Okuyama, Influences of surface charge, size, and concentration of colloidal nanoparticles on fabrication of self-organized porous silica in film and particle forms, Langmuir (IF=4.086), 29(21), 6262-6270 (2013).(Ac2013/05/02, Pb2013/5/2) https://doi.org/10.1021/la401094u

56  S. Sago, A. B. Suryamas, G. M. Anilkumar, T. Ogi*, K. Okuyama, In situ growth of Pt nanoparticles on electrospun SnO2 fibers for anode electrocatalyst application, Materials Letters (IF=2.307),105(15), 202-205 (2013).(Ac2013/04/04, Pb2013/8) https://doi.org/10.1016/j.matlet.2013.04.007

2012/4 - 2013/3

55  T. Ogi*, A.B.D. Nandiyantio, K. Okino, F. Iskandar, W-N Wang, E. Tanabe, K. Okuyama, Towards better phosphor design: effect of SiO2 nanoparticles on photoluminescence enhancement of YAG:Ce, ECS Journal of Solid State Science and Technology,(new Journal), 2(5), R91-95, (2013).(Ac2013/3/25,Pb2013/0404)

54  T. Ogi, A.B.D. Nandiyantio, Y. Kisakibaru, K. Nakamura, T. Iwaki, K. Okuyama, Facile synthesis of single-phase spherical α"-Fe16N2/Al2O3 core-shell nanoparticles via a gas-phase method, Journal of Applied Physics (IF=2.168)113(16), 164301-1~164301-5 (2013). (Ac2013/3/12,Pb2013/4)

53  T. Ogi*, N. Tajima, R. Balgis, H. Setyawan, K. Okuyama, Influence of formic acid on electrochemical properties of high-porosity Pt/TiN nanoparticle aggregates, AIChE Journal (IF=2.261), 59(8), 2753-2760 (2013). (Ac2013/2/5,Pb2013/8)

52  荻 崇*，小野 瞳，包 理，新沼 仁，奥山 喜久夫, 静電紡糸法によるナノファイバーの形態制御とエアフィルタへの応用，化学工学論文集 (IF=0.312), 40(2), 1-6 (2014).(Ac2013/1/28,Pb2014/2). T. Ogi*, H. Ono, L. Bao, H. Ninuma, K. Okuyama, Morphology-controlled synthesis of electrospun nanofibers and their application for aerosol filtration, Kagaku Kogaku Ronbunshu (IF=0.312),40(2), 1-6 (2014).(Ac2013/1/28,Pb2014/2).

51  A. B. Suryamas, G. M. Anilkumar., S. Sago, T. Ogi*, K. Okuyama, Electrospun Pt/SnO2 nanofibers as an excellent electrocatalysts for hydrogen oxidation reaction with ORR-blocking characteristic, Catalysis Communications (IF=2.986), 33, 11-14, (2013). (Ac2012/12/14,Pb2013/5/5)

50  I. M. Joni, T. Ogi, T. Iwaki, and K.Okuyama, Synthesis of a colorless suspension of TiO2 nanoparticles by nitrogen doping and the bead mill dispersion process, Industrial & Engineering Chemistry Research (IF=2.237),52 (2), 547-555, (2012). (Ac2012/12/13,Pb2012/12/13)

49  R Balgis, G. M. Anilkumar, S. Sago, T. Ogi*, K. Okuyama, Ultrahigh oxygen reduction activity of Pt/nitrogen-doped porous carbon microspheres prepared via spray-drying, Journal of Power Sources (IF=4.951), 229(1), 58-64 (2013). (Ac2012/11/24,Pb2013/5)

48  A. Suhendi, M. Munir, A. Suryamas, A.B.D. Nandiyanto, T. Ogi, K. Okuyama: Control of cone-jet geometry during electrospray by an electric current, Advanced Powder Technology (IF=1.612),24,2, 532-536 (2013). (Ac2012/10/30,Pb2013/6)

47  A. Suhendi, A. B. D. Nandiyanto, T. Ogi, K. Okuyama: Agglomeration-free core-shell polystyrene/silica particles preparation using an electrospray method and additive-free cationic polystyrene core, Materials Letters (IF=2.307),91(15), 161-164 (2013). (Ac2012/9/12,Pb2013/5)

46  T. Ogi*, A. B. D. Nandiyanto, W-N Wang, F. Iskandar, K. Okuyama: Direct synthesis of spherical YAG:Ce phosphor from precursor solution containing polymer and urea, Chemical Engineering Journal (IF=3.461), 210(1), 461-466, (2012). (Ac12/9/4,Pb12/11/xx)

45  A. B. D. Nandiyanto, T. Ogi, K. Okuyama: Doughnut magnesium fluoride nanoparticles prepared by an electron-beam irradiation Method, Journal of Nanoparticle Research (IF=3.287), 14 (10), 1182 (2012). (Ac2012/8/30,Pb2012/9)

44  A. B. D. Nandiyanto, T. Iwaki, T. Ogi*, K. Okuyama: Mesopore-free silica shell with nanometer-scale thickness-controllable on cationic polystyrene core, Journal of Colloid and Interface Science (IF=3.070),389(1), 134-146, (2013). (Ac2012/8/28,Pb2013/1/1)

43  T. Ogi*, F. Iskandar, A. B. D. Nandiyanto, W-N Wang, K. Okuyama: Influence of polymer decomposition temperature on the formation of rare-earth free boron carbon oxynitride phosphors, Journal of Chemical Engineering of Japan (IF=0.662), 45(12), 995-1000, (2012). (Ac2012/6/23,Pb2012/12) (This paper was selected to be awarded JCEJ “Outstanding Paper Award of 2012”)

42  R. Balgis, G. M. Anilkumar, S. Sago, T. Ogi*, K. Okuyama, Rapid in-situ synthesis of spherical microflower Pt/C catalyst via spray-drying for high performance fuel cell application, Fuel Cells (IF=3.32), 12(4), 665-669, (2012), .(Ac5/16,Pb12/8)

41  A.B.D. Nandiyanto,Y. Akane,T. Ogi, K. Okuyama, Mesopore-free hollow silica particles with controllable diameter and shell thickness via an additive-free synthesis, Langmuir (IF=4.269), 28(23), 8616-8624,(2012). (Ac5/16,Pb12/5)

2011/4 - 2012/3

40  M.M. Munir, A. Suhendi, T. Ogi, F. Iskandar, K. Okuyama, Ion-induced nucleation rate measurement in SO2/H2O/N2 gas mixture by soft X-ray ionization at various pressures and temperatures, Advanced Powder Technology (IF=0.840),24(1), 143-149, (2013).(Ac2012/3/29,Pb2013/1).

39  T. Ogi*, Y. Kisakibaru, Y. Kaihatsu, W. N. Wang, M. M. Munir, K. Okuyama, Preparation and characterization of boron oxide-based red-emitting phosphors using Eu, Al and Ca additives, Materials Chemistry and Physics (IF=2.353), 133(1), 392-397, (2012). (Ac1/18,Pb2012/3)

38  A. B. D. Nandiyanto, A. Suhendi, T. Ogi*, T. Iwaki, K. Okuyama, Synthesis of additive-free cationic polystyrene particles with controllable size for hollow template applications, Colloids and Surfaces A: Physicochemical and Engineering Aspects (IF=2.130), 396, 96-105, (2012). (Ac12/15,Pb2012/2)

37  I. M. Joni, T. Ogi, A. Purwanto, K. Okuyama, T. Saitoh, K. Takeuchi, Decolorization of beads-milled TiO2 nanoparticles suspension in an organic solvent, Advanced Powder Technology (IF=0.636), 23(1), 55-63, (2012). (Ac12/13,Pb2012/1)

36  T. Ogi, K. Tamaoki, N. Saitoh, A. Higashi, Y. Konishi, Recovery of indium from aqueous solutions by the Gram-negative bacterium Shewanella algae, Biochemical Engineering Journal (IF=2.692), 63(15), 129-133, (2012). (Ac11/22,Pb2012/4/15)

35  R. Balgis, G. M. Anilkumar, S. Sago, T. Ogi*, K. Okuyama, Nanostructured design of electrocatalyst support materials for high-performance PEM fuel cells applications, Journal of Power Sources (IF=4.283), 203, 26-33, (2012).(Ac11/21,Pb2012/4/1)

34  H. Widiyandari, A. Purwanto, R. Balgis, T. Ogi*, K. Okuyama, CuO/WO3 and Pt/WO3 nanocatalysts for efficient pollutant degradation using visible light irradiation, Chemical Engineering Journal (IF=3.074), 180(15),323-329, (2012) (Ac11/1,Pb2012/1)

33  I. Matsui, T. Ogi, F. Iskandar, K. Okuyama, Perpendicular easy axis alignment of FePt nanoparticles on a platinum-(001) substrate for high-density magnetic recording, Journal of Applied Physics (IF=2.072),110(8), 083906 (2011). (Ac8/11,Pb2011/10)

32  A. B. D. Nandiyanto , T. Ogi* , A. Ohmura, E. Tanabe K. Okuyama, Liquid-phase synthesis of CaF2 particles and their low refractive index characterization, KONA Powder and Particle Journal (IF=0.486), 29, 141-157, (2011). (Ac8/6,Pb10/20)

31  I. M. Joni, R. Balgis, T. Ogi, K. Okuyama, Surface functionalization for dispersing and stabilizing hexagonal boron nitride nanoparticle by bead milling, Colloids and Surfaces A:Physicochemical and Engineering Aspects (IF=2.130), 388(1-3), 49-58, (2011). (Ac8/6,Pb2011/9)

30  A. B. Suryamas, M. M. Munir, T. Ogi, Khairurrijal, K. Okuyama, Intense green and yellow emissions from electrospun BCNO phosphor nanofibers, Journal of Materials Chemistry (IF=5.099), 21, 12629-12631, (2011). (Ac7/8,Pb2011/7)

29  S. Y. Lee, H. Chang, T. Ogi, F. Iskandar, K.Okuyama, Measuring the effective density, porosity, and refractive index of carbonaceous particles by tandem aerosol techniques, Carbon (IF=4.893), 49, 2163-2172, (2011/6).

28  R. Balgis, F. Iskandar, T. Ogi, A. Purwanto, K. Okuyama, Synthesis of uniformly porous NiO/ZrO2 particles, Materials Research Bulletin (IF=2.145), 46, 708-715, (2011/5).

27  N. Hagura, T. Ogi, T. Shirahama, F. Iskandar, K. Okuyama, Highly luminescent silica-coated ZnO nanoparticles dispersed in an aqueous medium, Journal of Luminescence (IF=1.847), 131, 921-925 (2011/5).

2011/4 - 2012/3

26  W. N. Wang, T. Ogi, Y. Kaihatsu, F. Iskandar, K. Okuyama, Novel rare-earth-free tunable-color-emitting BCNO phosphors, Journal of Materials Chemistry (IF=6.101), 21,5183-5189 (2011/2). (Invited Highlight Article) (Highly cited article: Total Web of Science=67)

25  A. Purwanto, H. Widiyandari, T. Ogi, K. Okuyama, Role of particle size for platinum-loaded tungsten oxide nanoparticles during dye photodegradation under solar-simulated irradiation, Catalysis Communications (IF=2.827), 12,525-529, (2011/2).

24  A. B. D. Nandiyanto, T. Ogi, F. Iskandar, K. Okuyama, Highly Ordered Porous Monolayer Generation by Dual-Speed Spin-Coating with Colloidal Templates, Chemical Engineering Journal (IF=3.074), 167, 409-415 (2011/2).

23  T. Ogi, R. Honda, K. Tamaoki, N. Saitoh, Y. Konishi, Direct room-temperature synthesis of a highly dispersed Pd nanoparticle catalyst and its electrical properties in a fuel cell, Powder Technology (IF=1.887) , 36(4) 288-292 (2011/10).

22  M. M. Munir, A. Suhendi, T. Ogi, F. Iskandar, K. Okuyama, Experimental evaluation of the pressure and temperature dependence of ion-induced nucleation, Journal of Chemical Physics, 133, 124315-1-124315-8 (2010/9).

21  A. B. Suryamas, M. M. Munir, T. Ogi, C. J. Hogan Jr., K. Okuyama, Photoluminescent ZrO2:Eu3+ nanofibers prepared via electrospinning, Japan Journal of Applied. Physics (IF=1.138), 49, 115003(2010/11).

20  Y. Kaihatsu, W. N. Wang, F. Iskandar, T. Ogi, K. Okuyama, Effect of the carbon source on the luminescence properties of boron carbon oxynitride (BCNO) phosphor particles, Journal of the Electrochemical Society (IF=2.241), 157(10), J329-J333 (2010/8).

19  A. Nandiyanto, F. Iskandar, T. Ogi, K. Okuyama, Nanometer to submicrometer magnesium fluoride particles with controllable morphology, Langmuir (IF=4.268), 26(14), 12260-12266 (2010/7).

18  D. Hidayat, W. Widiyastuti, T. Ogi, K. Okuyama, Droplet generation and nanoparticle formation in low-pressure spray pyrolysis, Aerosol Science and Technology (IF=2.739), 44(8), 692-705 (2010/8).

17  玉置洸司郎， 斉藤範三, 荻　崇, 野村俊之, 小西 康裕, 金属イオン還元細菌Shewanella algaeによるパラジウムの還元・回収, 化学工学論文集 (IF=0.312), 第36巻, 第4号, 288-292 (2010). K.Tamaoki, N.Saitoh, T.Ogi. T.Nomura, Y.Konishi, Microbial reduction and recovery of palladium using metal Ion-reducing bacterium Shewanella algae, Kagaku Kogaku Ronbunshu, 36(4), 288-292, (2010).

16  T. Ogi, N. Saitoh, T. Nomura, Y. Konishi, High yield synthesis of single-crystalline gold nanoplates using the metal ion-reducing bacteria, Transactions of the Materials Research Society of Japan, 35(1), 19-22, (2010).

15  T. Ogi, N. Saitoh, T. Nomura, Y. Konishi, Room-temperature synthesis of gold nanoparticles and nanoplates using Shewanella algae cell extract, Journal of Nanoparticle Research (IF=3.250), 12, 2531-2539 (2010).

2010/4 - 2011/3

14  F. Iskandar, S. G. Kim, A. B. D. Nandiyanto, Y. Kaihatsu, T. Ogi, K. Okuyama: Direct synthesis of hBN/MWCNT composite particles using spray pyrolysis, Journal of Alloys and Compounds (IF=2.135), 471(1-2), 166-171, (2009).

13  T. Ogi, D. Hidayat, F. Iskandar, A. Purwanto, K. Okuyama: Direct synthesis of highly crystalline transparent conducting oxide nanoparticles by low pressure spray pyrolysis, Advanced Powder Technology (IF=0.636), 20(2), 203-209, (2009).

12  T. Ogi, Y. Kaihatsu, F. Iskandar, E. Tanabe, K. Okuyama: Synthesis of nanocrystalline GaN from Ga2O3 nanoparticles derived from salt-assisted spray pyrolysis, Advanced Powder Technology (IF=0.636), 20(1), 29-34, (2009).

2009/4 - 2010/3

11  A. Purwanto, W. N. Wang, T. Ogi, I. W. Lenggoro, E. Tanabe, K. Okuyama, High Luminance YAG:Ce nanoparticles Fabricated from Urea Added Aqueous Precursor by Flame Process, Journal of Alloys and Compounds (IF=2.135), 463 (1-2), 350-357, (2008). (Highly cited article: Total Web of Science=61)

10  T. Ogi, Y. Kaihatsu, F. Iskandar, W. N. Wang, K. Okuyama, Facile synthesis of new full-color-emitting BCNO phosphors with high quantum efficiency, Advanced materials (IF=10.857), 20(17), 3235-3238, (2008). (Highly cited article: Total Web of Science=95)

9  D. Hidayat, T. Ogi, F. Iskandar, K. Okuyama, Single crystal ZnO:Al nanoparticles directly synthesized using low-pressure spray pyrolysis, Materials Science and Engineering B: Solid-State Materials for Advanced Technology (IF=1.756), 151(3), 231-237,(2008).

2008/4 - 2009/3

8  荻 崇, フェリーイスカンダル, 矢吹彰広, 奥山喜久夫, テンプレート材料を用いた二流体ノズル噴霧乾燥法による多孔質から中空粒子への形態制御, 化学工学論文集(IF=0.312), 33(5), 468-475, (2007). T. Ogi, F. Iskandar, A. Yabuki, K. Okuyama, Control of particle morphology from porous to hollow by spray-drying with a two-fluid nozzle and template materials, Kagaku Kogaku Ronbunshu (IF=0.312), 33(5), 468-475, (2007).

7  W. N. Wang, W. Widiyastuti, T. Ogi, I. W. Lenggoro, K. Okuyama, Correlations between crystallite/particle size and photoluminescence properties of submicrometer phosphors, Chemistry of Materials (IF=6.397), 19(7), 1723-1730, (2007). (Highly cited article: Total Web of Science=197)

6  T. Ogi, L. B. Modesto-Lopez, F. Iskandar, K. Okuyama, Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method, Colloids and Surfaces a-Physicochemical and Engineering Aspects (IF=1.988), 297(1-3), 71-78, (2007). (Highly cited article: Total Web of Science=36)

2007/4 - 2008/3

5  T. Ogi, F. Iskandar, Y. Itoh, K. Okuyama, Characterization of dip-coated ITO films derived from nanoparticles synthesized by low-pressure spray pyrolysis, Journal of Nanoparticle Research (IF=3.250), 8(3-4), 343-350, (2006).

4  F. Iskandar, T. Ogi, K. Okuyama, Simple synthesis of GaN nanoparticles from gallium nitrate and ammonia aqueous solution under a flow of ammonia gas, Materials Letters (IF=1.940), 60(1), 73-76, (2006).

2006/4 - 2007/3

3  T. Ogi, Y. Itoh, M. Abdullah, F. Iskandar, Y. Azuma, K. Okuyama, Fabrication and photoluminescence of highly crystalline GaN and GaN : Mg nanoparticles, Journal of Crystal Growth (IF=1.534) , 281(2-4), 234-241, (2005).

2  H. Chang, I. W. Lenggoro, T. Ogi, K. Okuyama, Direct synthesis of barium magnesium aluminate blue phosphor particles via a flame route, Materials Letters (IF=1.940), 59(10), 1183-1187, (2005).

2005/4 - 2006/3

1  M. Abdullah, F. Iskandar, S. Shibamoto, T. Ogi, K. Okuyama, Preparation of oxide particles with ordered macropores by colloidal templating and spray pyrolysis, Acta Materialia (IF=3.760), 52(17), 5151-5156, (2004).

11 吉武啓太, 鈴木智之, 平野知之, 荻　崇 :火薬を用いた球状微粒子の燃焼合成, 粉体工学会誌, (In press)

10 横山公一*, 佐々木郷紀, 清澤正志, 佐藤一教, 平野知之, 荻崇, :多孔質構造を有する円管内表面へコーティングした触媒粉体層のCO₂メタネーション特性, 粉体工学会誌, 60(8), 462-469 (2023).

9 Yayuk Astuti, Darul Amri, Didik S. Widodo, Hendri Widiyandari, Ratna Balgis, Takashi Ogi: Effect of Fuels on the Physicochemical Properties and Photocatalytic Activity of Bismuth Oxide, Synthesized using Solution Combustion Method, International Journal of Technology, 11(1), 26-36, (2020). (Ac2020/1/10, Pb2020/X). DOI: 10.14716/ijtech.v11i1.3342

8 Lailatul Qomariyah, Widiyastuti Widiyastuti, Sugeng Winardi, Kusdianto Kusdianto, Takashi Ogi: Volume Fraction Dependent Morphological Transition of Silica Particles Derived from Sodium Silicate, International Journal of Technology, 10(3), 603-612, (2019). (Ac2019/5/13, Pb2019/5). DOI: 10.14716/ijtech.v10i3.2917

7 須田洋, 向井康晃, 玉舘知也, 今井健之, 大江純平, 瀬戸章文, 東秀憲, 大谷吉生, 荻 崇, 奥山喜久夫: 静電噴霧による多価帯電アミノ酸ナノ粒子の生成, エアロゾル研究, 32(4), 269-275, (2017). (Ac2017/11/1,Pb2017/12/20).

6 藤本敏行, 瀬戸章文, 荻 崇, 奥山喜久夫:非常態下における二次粒子生成・成長とその計測技術, エアロゾル研究, 29(1), S6-S17, (2014). (Ac2013/10/01,Pb2014/2), T. Fujimoto, T. Seto, T. Ogi, K. Okuyama: Development of an aerosol instrumentation and secondary particle formation and growth under low pressure and low temperature conditions, Earozoru Kenkyu, 29(1), S6-S17, (2014). (Ac2013/10/01,Pb2014/2)

5 横田 勝, 玉置洸司郎, 齋藤範三, 佐分利敏雄, 荻 崇, 栃原美佐子, 小西康裕:金属イオン還元細菌"Shewanell algae"を用いた銅酸化物から金属銅への直接還元, 粉体および粉末冶金,60(7), 334-340 (2013).(Ac2013/05/23,Pbxx)

4 荻 崇*，木崎原裕, I Made Joni, 岩木貫, 奥山喜久夫: 酸化チタンの表面改質による無色透明ナノ粒子分散液の作製, 粉体工学会誌 ,50(6), 421-428 (2013).(Ac2013/3/5,Pb2013/6) T. Ogi*, Y. Kisakibaru, I Made Joni, T. Iwaki, K. Okuyama：Synthesis of a colorless suspension using surface modified TiO2 nanoparticles, Journal of the Society of Powder Technology,50(6), 421-428 (2013).(Ac2013/3/5,Pb2013/6)

3 東あるみ, 斎藤範三, 荻　崇, 小西康裕, "バイオ吸着によるインジウムの回収と使用済み液晶パネル資源化への応用", 金属学会誌, 75(11), 620-625,(2011) (Ac8/24,Pb11/1), H. Arumi, S. Norizoh, T. Ogi, K. Konishi: Recovery of Indium by biosorption and its application to recycling of waste liquid crystal display panel, Journal of the Japan Institute of Metals, 75, 11, 620-625 (2011).(Ac8/24,Pb11/1)

2 荻　崇, 蒔田顕輔, 玉置洸司郎, 斎藤範三, 小西康裕: 還元細菌Shewanella oneidensisを用いたAu(III)イオンの還元・ナノ粒子化, 粉体工学会誌, 48(3), 160-166 (2011/3). T.Ogi, K.Makita, K.Tamaoki, N.Saitoh, Y.Konishi: Synthesis of gold nanoparticle by the metal ion-reducing bacterium shewanella oneidensis, J. Soc. Powder. Technol. Jpn., 48(3), 160-166 (2011).

1 岩松正, 平川千佳, 中井祥二, 荻　崇, 奥山喜久夫: 静電噴霧法による無機・有機 コンポジット粒子の合成, 粉体工学会誌, 47(12), 820-825 (2010/12). T. Iwamatsu, T. Hirakawa, S. Nakai, T. Ogi, K. Okuyama: Preparation of inorganic/polymer composite particles by electrospray, J. Soc. Powder. Technol. Jpn., 47(12), 820-825, (2010).

8  T. Ogi*: Aerosol Process for Materials Synthesis on the Use of Rare Metal, Proc. of 21th Nisshin Engineering Particle Technology International Seminar, Japan, pp.25-32, (2012).

7  K. Okuyama, T. Ogi, A. B. D. Nandiyanto, R. Balgis: Aerosol Material Processing for Energy and Environmental Application, Proc. of the first China-Japan Aerosol Symposium, pp5-8, (2012).

6  A.B.D. Nandiyanto, A. Suhendi, Y. Kisakibaru, T. Ogi*, K. Okuyama: Generation of Highly Ordered Porous Antimony-Doped Tin Oxide Film by a Simple Coating Method with Colloidal Template, World Academy of Science, Engineering and Technology, 6, 1146-1149, (2012).

5  Y. Kisakibaru, A.B.D. Nandiyanto, R. Balgis, T. Ogi*, K. Okuyama: Preparation of Porous Carbon Particles using a Spray-Drying Method with Colloidal Template, World Academy of Science, Engineering and Technology, 6, 378-381, (2012).

4  T. Ogi, R. Honda, K. Tamaoki, N. Saitoh, Y. Konishi: Biopreparation of Highly Dispersed Pd Nanoparticles on Bacterial Cell and Their Catalytic Activity for Polymer Electrolyte Fuel Cell, Proc. of 2010 MRS Spring meeting, MRS, vol.1272, pp.201-207, (2010).

3  Y. Konishi, N. Saitoh, T. Ogi: A New Biohydrometallurgical Method for Processing of Deep-Sea Mineral Resources, Proc. of the 28th International Conference on Ocean, Offshore and Arctic Engineering (2009).

2  Y. Konishi, S. Shimanaka, N. Saitoh, T. Ogi, T. Nomur: Microbial Preparation and Catalytic Activity of Palladium Nanoparticles on the Metal-Reducing Bacterium Shewanella oneidensis, Proc. of third International Conference on Processing Materials for Properties, 787-790 (2008).

1  T. Ogi, T. Tachimi, N. Saitoh, T. Nomura, Y. Konishi: Microbial Synthesis of Gold Nanotriangles Using the Metal-Reducing Bacterium Shewanella algae, Proc. of third International Conference on Processing Materials for Properties, 783-786 (2008).